Forklift Finder
Counterbalance
Warehousing
Combilift
Narrow Aisle
Used forklifts

Used Forklifts

Most of the equipment is selected from our extensive fleet with the benefit of us knowing the history of each piece of equipment. The equipment is then prepared as outlined below:

Engine & Transmission

i

Hydraulics

i

General Checks

i

Electrical

i

Steering

i

12m Warranty

i

Brakes

i

Mast

i

Electric

i
close
Engine & Transmission

A full service to the engine and transmission

close
Hydraulics

All hydraulic cylinders are checked for any damage or leaks. The hydraulic pipes are replaced if necessary. The hydraulic oil levels are checked and the hydraulic system is tested.

close
General Checks

The driver’s seat and seat belt are checked. All tyres are checked and replaced if necessary. Electric equipment batteries are replaced and any chargers are checked and rectified as necessary. The equipment is prepared and repainted to the manufacturer’s specifications. A load test is carried out and an update to the load rating plate is made, if required, to meet the equipment specification. Prior to delivery, a final inspection of the equipment is performed.

close
Electrical

Test carried out to the power circuits, a thorough check to the alternator, starter and the battery, overall, to ensure it is in good working order.

close
Steering

Inspection of the steering joints, steer pins and bushes and kingpins is carried out. The wheel bearings are replaced where necessary and the steering is checked to ensure the performance is satisfactory.

close
12m Warranty

LOLER 12 Months Truck Warranty: 6 Months or 500 hrs New Battery Warranty (electric forklifts): 5 years manufacturers guarantee.

close
Brakes

All brakes are checked and adjusted where required, and inspection of the brake’s master cylinder and wheel cylinders are examined for leaks. Brake pipes are checked and any adjustments to the handbrake mechanism are made or replaced if necessary. The braking system is tested for maximum efficiency and to ensure that the brake performance is satisfactory.

close
Mast

A full inspection of the mast assembly is carried out, replacing any damaged bearings, rollers, or side thrusts. Any damaged chain anchor points that are found are replaced. The load chains are inspected, as well as a test of the forks, which are replaced if necessary.

close
Electric

Test carried out to the power circuits, a thorough check to the alternator, starter and the battery, overall, to ensure it is in good working order.

Carrylift Approved Used Equipment

Make – TCM

Price

£11175

MODEL FG15

YEAR OF MANUFACTURE 2015

FUEL Gas

HOURS 1

CAPACITY 1,500 KGS

MAST TWO STAGE WIDE VIEW

LIFT HEIGHT 3.7M

CLOSED HEIGHT 2.6M

EQUIPMENT NO. 124907

Enquire

Make – TCM

Price

£13571

MODEL FD32

YEAR OF MANUFACTURE 2015

FUEL DIESEL

HOURS 5848

CAPACITY 3,200

MAST TRIPLEX

LIFT HEIGHT 6.0

CLOSED HEIGHT 2.875

EQUIPMENT NO. 124782

Enquire

Make – TCM

Price

£10855

MODEL FG18

YEAR OF MANUFACTURE 2015

FUEL LPG

HOURS 11506

CAPACITY 1,800 KGS

MAST TWO STAGE WIDE VIEW

LIFT HEIGHT 4M

CLOSED HEIGHT 2.6M

EQUIPMENT NO. 124521

Enquire

Make – TCM

Price

£11185

MODEL FG25

YEAR OF MANUFACTURE 2016

FUEL LPG

HOURS 16,873

CAPACITY 2,500 KGS

MAST TWO STAGE WIDE VIEW

LIFT HEIGHT 4.0M

CLOSED HEIGHT 2.6M

EQUIPMENT NO. 124947

Enquire

Make – TCM

Price

£11652

MODEL FD15

YEAR OF MANUFACTURE 2016

FUEL Diesel

HOURS 5606

CAPACITY 1,500 KGS

MAST TRIPLEX

LIFT HEIGHT 4.3M

CLOSED HEIGHT 2M

EQUIPMENT NO. 125607

Enquire

Make – Kalmar

Price

£30132

MODEL ECD70

YEAR OF MANUFACTURE 2008

FUEL Electric

HOURS 308

CAPACITY 7,000 KGS

MAST THREE STAGE STANDARD

LIFT HEIGHT 3.8M

CLOSED HEIGHT 2.3M

EQUIPMENT NO. 115173

Enquire
 Enquire Now: image
Enquire Now:

    Accreditations
    acr